名稱

Designation

內容說明

Content Description

1、

單機組模式

將流水線分解成獨立機臺，機臺體積小，易于流程變換，為多樣少量化生產量身訂造。

Single Unit Mode

The assembok ine is broken down into sole machines.the smalsize of each machine can easly be re-aranged for diferent production processes and thusit ould be customizedfor a variety of small-quantity productions.

2、

模塊化串聯

機臺設備采用水平進出，機內回轉式移動架設計?？膳c其他機臺進行串聯，極簡操作即可進行鏈式拼接。

Serial Modular Setup

A rotany moving frame with a flat access platform is designed for each machine. Such machines can be senaly connected to each other within minimaistic operations.

3、

單邊進出口

出入口均在單側，利于傳遞和取放，可有效降低勞動強度，強化目視管理。

Single-Side Inlet and Outlet

Inlet and outet are set on the same side which are beneficial for transfering and stoning, labor intensity is efectively reduced, and visual monitoring is strengthened.

4、

U型設計

在精簡機臺體積的同時,提供超過機臺長度2倍的軌道長度。雙倍的加熱效果保證了足夠的定型效果和拉力。

U-shaped Design

The sze ofthe machine is desioed to be more compacted and compied wih a trackwhose length is twice longer than the lenoth ofthe machine Douple heaing caoaciesensure qood setting effect and tension.

5、

空氣凈化系統

本機采用集中式設計理念 ， 使廢氣經過活性炭空氣凈化系統過濾后再排放 ，空氣凈化程度高 ，保障生產人員呼吸健康 。

Air Purification System

This machine folows a centalzed desion.in which the exaust gas frst goes throuoh an activated-caron air purifcaltion svstem and gets fitered before being dischared.Thibrings a high degree of air purification to protect the respiratory health of the production personnel.

6、

極致節能

由于內部體積大幅減小，使機臺內部保溫效果極佳，能迅速達到設定溫度。上下層獨立控溫，為客戶節省每一度電!

Ultimate Energy Saving

The interal volume is greatly reduced, which makes an optimal temperature for and the temperature seting can be reached to the requirement. There are independenttemperature controls for both upper and lower sections, and thus the svstem is very eneray efficient.